Nokia Charging Solutions in one exe. by Mehmood Riaz - Forum Komunitas Teknisi Ponsel Indonesia

Nokia Charging Solutions in one exe. by Mehmood Riaz - Forum Komunitas Teknisi Ponsel Indonesia

Posted using ShareThis

[PCG] Obscure: The Aftermath ( ENG/2008 )

[PCG] Obscure: The Aftermath ( ENG/2008 ) PC | English | Hydravision | 2008 | 2.58 GB Genre: Horror Action Adventure The Aftermath - a supplement Obscure, which appeared in 2005, the action takes locate 2 years after the horrific events in Leafmore High, where teenagers trapped survived by labour monsters, and the Director-maniac. Hoping to forget the past, they go on to college Fallcreek, but soon obnaruzhivat that all is not so good, strange black flowers appear around campus. By experimenting with these flowers, they discover a dangerous substance that evokes pure dreams. Soon the survivors are conflict for their lives - and their nightmares, which become a intense reality.

..!! CruiserSuite TP Full Unlocker v1.00 released !!..

| 0 comments

Dear all,

we have just released most wanted SonyEricsson Full Unlocker via TestPoint with Security Zone repair possibility. The CruiserSuite TP Full Unlocker requires UC-20 TestPoint cable - you can buy it from any of our resellers.

All other TestPoint solutions force the phone address bus pins to 3.3V which is exceeding its maximal allowed voltage almost twice. Only the UC-20 TP cable was designed to prevent this and avoid likely flash chip damage.

Here are release notes of CruiserSuite TP Full Unlocker v1.00:

  • Simple to use & failsafe
  • Supports all DB2020 plattform based SonyEricsson phones
  • All current CIDs are suported
  • This software is for all users who can disassemble the phone - also for inexperienced ones. (For disassembling phones, we recommend to read proper SonyEricsson service manuals.)
  • TP Full Unlocker does not destroy phone calibration data (so typical for SeTool ... )
  • For the phone safety, TestPointing requires UC-20 TP cable.
  • Unlike other amateur solutions which use external battery connection to the TP, our software uses specially designed UC-20 cable which can handle different bus voltages and prevents any potential flash chip damage.
  • TP is done in two stages. Once you complete TP stage 1 you don't need to repeat it anymore. Phone is then bootable via the 2nd testpoint anytime.
  • PDF manual is available after installation as usual in Documents folder

You can download the software from our Downloads section or from this Rapidshare link.



ENJOY!

F.A.Q About P2K Series.

| 0 comments

Here Is Little Info About P2K ..

May Be This Can Help All Users..

1 P2k How To Connect Phone With Pc.?
A. Use P2k Driver To Detect Phone At Modem .Like Here Software Is Auto install So Just Tick On "Clean And Reinstall " Press Start It Install All. Here Is Link For P2k Driver Only Without Auto Install.
B. After Installing Modem You Have To Switch Phone To P2k Mode To Accept All Another Drivers Which Need For Read And Repair .Use Rsd Lite To Do That.. Link Is Here

2 What Is Rezone We Have To Install Driver?
A. Motorola All Command And Loader Base On Factory Info.So They Using P2k Mode And Flash Mode To Access, Modification And Any Changing If We Need.
B. Without Driver We Can't See Phone So Must Install Before Do Anything.. And Open Rsd Lite To Let Him Complete Installation.

3 What Is Rezone We Need Rsd Lite?
A. There Is Many Rezone .[1] To Install Complete Driver.[2] To Flash Firmware To Phone [3] Flash Fex File To Phone.

4 What Is Flash Mode?
A. Flash Mode Is Most Important Thing We Need To Flash Phone And Repair Phone. By Pressing {*+#+Power Button} You See Black Screen Which Come Because Of Flash Mode. With Much Info That What In Phone..

5 What Is P2k Mode?
A. P2k Mode Is Need To Send Phone Commands Receiving Data..
B. Modified Flex Area.
C. Modified User Area Like User Code Security Code.

6 At Flash Mode In Phone I Can See Many Info. What Are They?
A. Most Important Info. Boot loader Xx ***x
B. Software Version Info.
C. Interface Which Is Connected.

7 What Is Boot Loader?
A. Boot loader Is = Flash Mode.. Without Boot Loader Your Phone Go To Special Blank Mode.

8 What Is Software Version?
A. Software Version Which Ur Phone Have. You Must Flash Same Version Or Newer Then It Firmware Or Monster Flash File To Phone Only..

9 What Is Blank Mode?
A. Blank Mode Is Special Mode To Use Unlocking Changing Pds And If We Losted Boot loader Then Its Come..

10 How To We Know That Phone Is In Blank Mode?
A. Just Plug Cable To Phone And Pc Your Phone Detect As S Blank ****** Means Your Phone Have No Valid Boot loader. So Its In Blank. You Can Call Him Dead Phone Right Now..

11 What Is Lte And Lte2 Prog And Aragon?
A. Its Are Cpu That Phone Use.

12 What Is Pds?
A. Pds Contact So Much Info About Phone Security .
B. Pds Have Lock Data
C. Pds Have Calculated Security Of Phone.
D. Pds Can Be Rewrites Or Recalculated Via Only Tp. Or Blank Mode With Special Method.

13 What Is Rezone At Phone Flash Mode We See Code Corrupted?
A. Firmware Damaged So First Reflash It
B. Pds And Firmware Code Not Matched Do Pds Repair And Reflash It.

14 What Is Rezone We See Mem Blank At Phone Flash Mode?
A. Firmware Area Damaged Reflash Will Fix It.
B. Boot Area Damaged Install Boot Will Fix It.
C. Pds Area Damaged Recalculate Or Rewrite Pds Then Flash Will Fix It.

15 What Is Rezone We See Some Time Lcd Problem?
A. Flex Area Have Special Part For Lcd Setting Rf Value You Need To Rewrite It.

16 How To Flash Phone With Rsd Lite?
A. Simple Just Connect Phone At Flash Mode [*+#+Power Button]
And Select Active Ur Model & Select Correct Flash File And Press Start ..

17 How To Check Software Version And Boot loader If Phone Lcd Damage Or Blank ?
A. Just Use Simple Flash Mode [*+#+Power Button] And Open Rsd Lite To See Phone Info. For More Details Just See Image.

18 Why Some Phone Start At Flash Mode Only?
A. Firmware Damaged Reflashing Full Flash May Solve
B. Pds Damaged Recalculate Or Rewrite Then Full Flash Need To Resolve Problem

19 What Is Image Flash? (RFDI)
A. It Is Repair File For Repair Boot And Pds For Blank Phones Only. If U Have Phone Which Is Detect In Blank Mode Only. Use RFDI Image To Restore/Repair Pds And Boot Area. After Flashing RFDI File You Must Flash Monster Flash Or Reflash To Phone.

20 What Is Monster Flash And Reflash?
A. Reflash Come With Only Firmware And Drm Area.
B. Monster Flash Come With Firmware, Flex, Pds Info, Drm, Lang, Mostly Everything.

21 What Is Rezone Software Not Found Phone Start At Flash Mode Only?
A. Phone Firmware Damaged Reflash Monster Flash Only. To Check
B. Pds Corrupted Rewrite Or Recalculate Then Full Flash May Solve It.
C. Still Same Just Problem With Version In Case You Must Erase Phone Flash Then Do Image Flash To Restore Boot are Then Pds Repair To Check You Get Firmware Version Or Not. If Yes Reflash Latest Version .If No Then Have Bad Hardware At Phone.

NEWEST AUTO INSTALL DRIVERHERE

IMODE DRIVER ONLY FOR IMODE BASE MOTOROLA
HERE
Just Wait For Unlocking Info Soon I Post Every Tested Phone Method To Unlock And Repair Free.


HOPE THIS CAN HELP ALL..

note : i will update this thread day by day..

BEST REGARDS
Gopal Chevli.

SmartMoto v3.15, Smart-Clip v4.08, S-Card 2.09 and Smart Adaptor v1.05

Dear users,
We are pleased to introduce a new version of SmartMoto v3.15, Smart-Clip v4.08, S-Card 2.09 and Smart Adaptor v1.05.

With this release we present the following options.

  1. Released Unlock, Format FFS and Repair EEPROM for the model W375В (Compal unlock procedure).
  2. The models W161 and W181 are added to the supported models list (although they were already supported before).
  3. Improved Prepare cycle for the models W510/W490. From now on, the handsets with an error 0085/00CA are supported.
  4. The model W270 was already supported for unlock, and now, Repair EEPROM and Format FFS are added for it.
  5. Developed Repair PDS function for the model U3.
  6. V365 fw R444HL1 is now included to the list of PDS Repair supported (although it was supported before).


Please don’t forget to update all your products and use Smart-Clip Update Zone to update S-Card.
Update Smart-Clip first and perform S-Card update after that only.
We recommend to use only the latest versions of Smart-Clip, S-Card, Smart Adaptor and SmartMoto.
If you wish to receive news on updates immediately, please subscribe to our new SMS notification system.


Smart-Clip ON!