Cpu mtk6235 solution that fails with format mcnbox

IF HAVE A PROBLEM WITH CPU YANGG MTK6235 especially in HP BB CHINA

I have the solution

If we CLICK FORMAT

THIS PROBLEM COMES

Can manually set info address
Press and Holding Power fix now !
Connecting, wait...
Phone detected, wait..
CPU: 6235 Ver: 0001 SW:8A01
CPU ID: 00000300
Initialize Boot...
Flash(Nand) Type: [TOSHIBA] TC58NVG0S3AFT
Flash(Nand) Code: 009800D1(00900015)
Flash(Nand) Size: 0x08400000 Hex Bytes
INT/EXT RAM Size: 0x00010000+0x00000000
Start formatting (Nand) ...
>>Format intend Error Code 1

The solution

CLICK FILETOOLS THEN SELECT FILETOOLS

OPEN FILE (SELECT FILE OR WE READ FROM HP Backup THAT NORMAL)
SAVE FILE (Point FILE IN HIS WILL THAT SAVE)

AFTER THAT SELECT FORMAT TAB

CLICK AND SAVE

THEN CLOSE
INPUT FILE FORMAT IN WHICH ALREADY been

THEN WRITE FLASH
Press and Holding Power fix now !
Connecting, wait...
Phone detected, wait..
CPU: 6235 Ver: 0001 SW:8A01
CPU ID: 00000300
Initialize Boot...
Flash(Nand) Type: [TOSHIBA] TC58NVG0S3AFT
Flash(Nand) Code: 009800D1(00900015)
Flash(Nand) Size: 0x08400000 Hex Bytes
INT/EXT RAM Size: 0x00010000+0x00000000
Checking baud??
Set Baud:921600 OK.
New flash detection artefact actived
Start Writing(Nand)...
Write Done.
if phone not pwoer on, try to formatS
>>Time used£º 6 mins9 s

HP GUARANTEED OUTCOME DIRECT NORMAL LIFE AGAIN

TESTED BY ME 10000000%