All japanese phones!!! AT comand unlock TESTING...

Hi, everybody!
Just unconcealed a artefact to alter the hypersim with some simcard at small with SH01B.
Need some testers to try this out.
My SH-01B entireness fine (without some CPR and Off/On) for 4 days. Accu entireness as long as before.

So, what you requirement to do the procedure:

- SH01B (can try some SH and other)
- Simcard (any)
- Hypersim (i-Smartphone 2009 tested)
- USBcable
- Software (dunno if it restricted in your countries, but here in Russia it's free to download )

So, let's go!

1. Install your modem driver onto the PC. Connect your keitai to the PC using “Communication Mode”. Your cellphone staleness be defined as the modem device in your PC’s Control Panel Modem section.
2. XP users launch Hypertherminal (Menu_Accessories_Connection (sorry if I translated it wrong)). Vista and "7" users download Teraterm (ФоÃ'€Ã'Æ'м J-phone) and then superior Serial port with your keitai modem port.
3. XP USERS ONLY: When “New connection” appears, near Cancel and then Enter. Keitai modem staleness be as choice modem. PC module enter your phone.
There staleness be “Autosearch” (autoselect/autochoice) and “460800 8-N-1”.
4. Type ATE1 command and near Enter. OK appears.
5. Type AT+COPS?. Then +COPS:0,2,"52F010" (diff. simcards show diff MCC+MNC ("52F010") results) staleness appear. Copy all this text.
6. Type AT+COPS=1,2,"52F010" and near Enter. This activeness makes your cellphone enter only your carrier.
7. Now we requirement to spend our changes. Type AT&W command and near Enter. OK appears. Changes saved.
Now effort your communication temporary the places where the communication disappears (subways, fields etc).

As I understand success depends on the hypersim card type. At small I did it with my i-smart 2009 red version. Hope it work with others.

Took from j-phone.ru

Tell if one's OK. Will keep on workin on it.